All-in-1 total solution for the monitoring and reporting vibrations
Part of the Omnidots solution for vibration monitoring and reporting
The PoE adapter provides the Omnidots SWARM with both Ethernet and power, using one cable. When using the PoE adapter you can install your SWARM in places with no 3G / 4G / LTE or WiFi connection, or in places where you cannot use an Omnidots Battery, Solar panel set or mains power. The PoE adapter is the ideal product for monitoring at for example very remote areas or underground in a basement or tunnel.
Do you want to sell the PoE adapter to your customers? Then become an Omnidots dealer.
Information about the PoE Adapter
Article number: POEADAPT/1
- Meets all industry standards
Using the PoE adapter means you can use Power over Ethernet to monitor in places where there's no 3G / 4G / LTE or WiFi possibility. For example underground in tunnels, in basements or at very remote locations.
The PoE adapter comes with a 3 meter (9.8 ft) long cable, with which you connect the adapter to your SWARM. To connect the PoE adapter to your network*, use your own Ethernet cable of the length required for your specific project (up to 100 meters/328 ft). The PoE adapter can be used with a SWARM of the V2.1 or V2.2 series. If you need an IP65 (splash water proof) connection, you must use the provided IP65 connector sleeve for the RJ45 connector.
* Ethernet network / LAN Network Switch / Network Outlet with PoE+ possibilities