What does the color of the LED light on my SWARM mean?

Breathing orange  The SWARM is trying to make connection
Solid purple, white or purple

The SWARM is starting up.

Solid red The SWARM is starting up.
Blinking blue / black The SWARM is auto-leveling. This takes ten seconds.
Breathing orange / white The SWARM is measuring but has no server contact. *When the SWARM is factory default it won’t be measuring during breathing orange/white.
Breathing green / white The SWARM is measuring and has server contact via 3G/4G/LTE.
Breathing green / purple The SWARM is measuring and has server contact via WiFi.
Breathing green / cyan The SWARM is measuring and has server contact via the PoE adapter.
Breathing cyan / black The SWARM is downloading guideline filters.
Blinking green / black The SWARM is going to sleep (outside the scheduled measurement hours).
Rapidly flashing blue / black The SWARM performs a firmware upgrade.
Blinking red / black The SWARM is disturbed during auto-leveling. Make sure the SWARM is securely tightened to the wall and then initiate another auto-leveling from the measuring point overview page on the Honeycomb platform.
Blinking orange / black Low voltage detected, measurement quality might be impaired. Please check if the battery has enough charge and the power supply can deliver enough power for the SWARM to operate properly.
Solid black (LED off) LED status is disabled by user on Honeycomb. Or SWARM has no power.
Breathing red / black Please contact us via the chat at the bottom right of this page or via support@omnidots.com.

 

Notes on blinking / flashing / breathing

  • Flashing is toggling between colors with 50ms interval.
  • Blinking is toggling between colors with 1s interval.
  • 'Breathing' is gradually moving between colors with 1s interval.

LED colors of the SWARM

Below are the colors that the SWARM LED can have:

LED_colors_of_the_SWARM