PPA/Atop support in ISEE and SN 640 312A guidelines
PPA/Atop has now been included in the ISEE and SN 640 312A guidelines.
New guidelines
From now you can use the Omnidots solution for measuring according to the following guidelines: SN640312A, OSMRE and USBM RI 8507. Available on the SWARM V2.0, V2.1 and V2.2 series.
Switching graphs based on data
When you have a project with multiple methods of data logging (for example PPA and PPV), the graph will automatically switch to the tab with collected data. The tabs containing any data will be highlighted in white
PPA/Atop Alarms
You now have the option to set PPA/Atop alerts in Honeycomb. These are peak particle acceleration/acceleration top alarms. These alarms work in a similar fashion as the PPV/VTop alarm.
Honeycomb supports French
The Honeycomb is already available in Dutch, English and German. Now we added french for our french speaking customers to monitor in the comfort of their language.
Construction site wireless vibration monitoring
Have you ever thought about beginning construction operations in the middle of a rather busy neighborhood, but then feared that the endeavor would be more costly than you anticipated? You should consider possible compensation claims that would be put up against you from the neighboring structures if...
Threshold for measurement storage
You can now store data below the lower limit of the threshold for measurement storage. In this way you can show noise in your graphs. We have understood from our customers that in some projects it is relevant to show noise in the graph. We are happy to meet this requirement. That is why we have impl...
Address of the SWARM
To display the location of a SWARM on the map in Honeycomb, the GPS location of the SWARM is usually used. If there is no GPS reception and you still want to see the location of the SWARM on the map, you can now manually enter an address of the SWARM when creating a measuring point. Please review t...
New LED colors on the SWARM
Next week there will be a SWARM update. Then your SWARM LED will show different colors. Each color indicates a different meaning. The colors have the following meaning:
- Green-White When the SWARM is connected to 3G/4G/LTE: alternating between breathing green (or orange if no connection is made...